• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • 李莎, 閻殿然, 董艷春, 王師, 高國旗, 張志彬. 反應等離子噴涂TiN涂層電化學腐蝕行為[J]. 工程科學學報, 2009, 31(9): 1147-1151. DOI: 10.13374/j.issn1001-053x.2009.09.009
    引用本文: 李莎, 閻殿然, 董艷春, 王師, 高國旗, 張志彬. 反應等離子噴涂TiN涂層電化學腐蝕行為[J]. 工程科學學報, 2009, 31(9): 1147-1151. DOI: 10.13374/j.issn1001-053x.2009.09.009
    LI Sha, YAN Dian-ran, DONG Yan-chun, WANG Shi, GAO Guo-qi, ZHANG Zhi-bin. Electrochemical corrosion behavior of reactive plasma-sprayed TiN coatings[J]. Chinese Journal of Engineering, 2009, 31(9): 1147-1151. DOI: 10.13374/j.issn1001-053x.2009.09.009
    Citation: LI Sha, YAN Dian-ran, DONG Yan-chun, WANG Shi, GAO Guo-qi, ZHANG Zhi-bin. Electrochemical corrosion behavior of reactive plasma-sprayed TiN coatings[J]. Chinese Journal of Engineering, 2009, 31(9): 1147-1151. DOI: 10.13374/j.issn1001-053x.2009.09.009

    反應等離子噴涂TiN涂層電化學腐蝕行為

    Electrochemical corrosion behavior of reactive plasma-sprayed TiN coatings

    • 摘要: 利用電化學阻抗譜等電化學方法及掃描電鏡(SEM)技術,研究了反應等離子噴涂TiN涂層在模擬海水中的電化學腐蝕行為.研究結果表明:TiN涂層的自腐蝕電位高于基體,涂層對基體能起到良好的腐蝕屏蔽作用;腐蝕介質通過涂層的通孔、微裂紋等缺陷滲入涂層與基體的界面腐蝕基體,從而使涂層電阻下降、電容增加,所產生的腐蝕產物在一定程度上可以抑制腐蝕反應的進行,但不會阻止基體局部腐蝕的繼續進行.涂層的孔隙是造成涂層電化學腐蝕的主要原因.

       

      Abstract: The electrochemical corrosion behavior of TiN coatings prepared by reactive plasma spraying was studied in seawater by SEM technology and electrochemical methods such as electrochemical impedance spectroscopy.The results showed that the corrosion potential of TiN coatings was higher than that of the substrate and the coatings had a good corrosion shielding effect on the substrate.The coatings resistance declined and capacitance increased because the corrosion medium permeated into the coating/metal interface through pinholes and microcracks immediately. Due to the products of corrosion the corrosion was restrained, but the products can not stop the local corrosion of the substrate. The electrochemical corrosion of the coatings were mainly as the result of holes in the coatings.

       

    /

    返回文章
    返回
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • 啪啪啪视频