中厚板分段多點成形及其數值模擬

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

中厚板分段多點成形及其數值模擬

麻桂艷, 付文智, 李明哲, 張傳敏, 馬順利

文章導航 > 工程科學學報 > 2008 > 30(1): 67-70,76

麻桂艷, 付文智, 李明哲, 張傳敏, 馬順利. 中厚板分段多點成形及其數值模擬[J]. 工程科學學報, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

引用本文:

麻桂艷, 付文智, 李明哲, 張傳敏, 馬順利. 中厚板分段多點成形及其數值模擬[J]. 工程科學學報, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

MA Guiyan, FU Wenzhi, LI Mingzhe, ZHANG Chuanmin, MA Shunli. Sectional multi-point forming and its numerical simulation of plates[J]. Chinese Journal of Engineering, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

Citation:

MA Guiyan, FU Wenzhi, LI Mingzhe, ZHANG Chuanmin, MA Shunli. Sectional multi-point forming and its numerical simulation of plates[J]. Chinese Journal of Engineering, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

麻桂艷, 付文智, 李明哲, 張傳敏, 馬順利. 中厚板分段多點成形及其數值模擬[J]. 工程科學學報, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

引用本文:

麻桂艷, 付文智, 李明哲, 張傳敏, 馬順利. 中厚板分段多點成形及其數值模擬[J]. 工程科學學報, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

MA Guiyan, FU Wenzhi, LI Mingzhe, ZHANG Chuanmin, MA Shunli. Sectional multi-point forming and its numerical simulation of plates[J]. Chinese Journal of Engineering, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

Citation:

MA Guiyan, FU Wenzhi, LI Mingzhe, ZHANG Chuanmin, MA Shunli. Sectional multi-point forming and its numerical simulation of plates[J]. Chinese Journal of Engineering, 2008, 30(1): 67-70,76. doi: 10.13374/j.issn1001-053x.2008.01.005

中厚板分段多點成形及其數值模擬

doi: 10.13374/j.issn1001-053x.2008.01.005

1. 吉林大學(南嶺校區)輥鍛工藝研究所, 長春 130025;
2. 沈陽華晨金杯汽車有限公司, 沈陽 110141

基金項目:

國家自然科學基金資助項目(No.50275063)

作者簡介:
麻桂艷(1981-),女,碩士研究生;付文智(1960-),男,教授,博士生導師

中圖分類號: TG306
計量
- 文章訪問數: 266
- HTML全文瀏覽量: 81
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 2006-10-13
- 修回日期: 2006-12-25
- 網絡出版日期: 2021-08-06

Sectional multi-point forming and its numerical simulation of plates

1. Roll forging Research Institute, Jilin University(Nanling Square), Changchun 130025, China;
2. Shenyang Brilliance Jinbei Automobile Co. Ltd., Shenyang 110141, China

摘要: 為了解決分段多點成形過程中的技術難題,利用數值模擬軟件對其成形過程進行數值模擬.以顯式算法模擬加載成形過程,隱式算法模擬卸載回彈過程,從而實現分段多點成形的數值模擬.采用非均勻有理B(NURBS)樣條曲線設計過渡區形狀,探討了過渡區大小對成形品質的影響.結果表明,在合理設計過渡區的情況下,分段成形品質好于一次成形.
- 中厚板 /
- 多點成形 /
- 分段成形 /
- 回彈
Abstract: In order to resolve technique problems in sectional multi-point forming, the forming process was simulated by a finite element software, in which dynamic-explicit formulation was used to analyze the loading processes and implicit algorithm formulation for the unloading processes. The forming surface of transition area was designed by non-uniform rational B-surface (NURBS), and the width of transition area that has effect on the quality of sectional forming parts was discussed. It is shown that when simulated with an appropriate design of transition area, sectional forming parts possess a better quality than one-step forming parts.
- plate /
- multi-point forming /
- sectional forming /
- springback

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 266
HTML全文瀏覽量: 81
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

x 關閉永久關閉

喜報|《工程科學學報》入選第6屆中國精品科技期刊！

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

啪啪啪视频