帶鋼拉伸彎曲矯直變形過程仿真研究

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

帶鋼拉伸彎曲矯直變形過程仿真研究

李忠富, 王文廣, 白劍, 徐曉明

文章導航 > 工程科學學報 > 2007 > 29(S2): 137-139

李忠富, 王文廣, 白劍, 徐曉明. 帶鋼拉伸彎曲矯直變形過程仿真研究[J]. 工程科學學報, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

引用本文:

李忠富, 王文廣, 白劍, 徐曉明. 帶鋼拉伸彎曲矯直變形過程仿真研究[J]. 工程科學學報, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

LI Zhongfu, WANG Wenguang, BAI Jian, XU Xiaoming. Simulation of strip deformation in process of tension leveling[J]. Chinese Journal of Engineering, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

Citation:

LI Zhongfu, WANG Wenguang, BAI Jian, XU Xiaoming. Simulation of strip deformation in process of tension leveling[J]. Chinese Journal of Engineering, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

李忠富, 王文廣, 白劍, 徐曉明. 帶鋼拉伸彎曲矯直變形過程仿真研究[J]. 工程科學學報, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

引用本文:

李忠富, 王文廣, 白劍, 徐曉明. 帶鋼拉伸彎曲矯直變形過程仿真研究[J]. 工程科學學報, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

LI Zhongfu, WANG Wenguang, BAI Jian, XU Xiaoming. Simulation of strip deformation in process of tension leveling[J]. Chinese Journal of Engineering, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

Citation:

LI Zhongfu, WANG Wenguang, BAI Jian, XU Xiaoming. Simulation of strip deformation in process of tension leveling[J]. Chinese Journal of Engineering, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

帶鋼拉伸彎曲矯直變形過程仿真研究

doi: 10.13374/j.issn1001-053x.2007.s2.069

1. 北京科技大學機械工程學院, 北京 100083;
2. 中國機械設備進出口總公司, 北京 100055

作者簡介:
李忠富(1972-),男,副編審,碩士

中圖分類號: TG333.2⁺3
計量
- 文章訪問數: 232
- HTML全文瀏覽量: 104
- PDF下載量: 8
- 被引次數: 0
出版歷程
- 收稿日期: 2007-09-09
- 網絡出版日期: 2021-08-16

Simulation of strip deformation in process of tension leveling

1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. China National Machinery and Equipment Import and Export Corporation, Beijing 100055, China

摘要: 帶鋼拉伸彎曲變形過程的表征是拉伸彎曲矯直工藝研究中的關鍵,帶鋼拉伸彎曲變形過程在本質上就是帶鋼在張力作用下的反復彎曲變形過程.本文建立了可以模擬此變形過程的有限元仿真模型,并對帶鋼拉伸彎曲變形過程進行了仿真研究,揭示了帶鋼產生塑性延伸和板形矯正的機理.在此基礎上,提出了拉伸彎曲矯直工藝使用制度.
- 帶鋼 /
- 拉伸彎曲矯直 /
- 仿真 /
- 拉伸彎曲矯直工藝
Abstract: The characterization of tensile-bend deformation was the core of tension leveling technology and the essence of tensile-bend deformation was cyclic repeated bend of steel strip with tension.The tension leveling simulation model,which could simulate cyclic reserved bend of steel strip with tension,was established.The mechanism of strip plastic extension and flatness leveling was discovered by the results of simulation and analysis,and the application schedule of tension leveling technology was put forward.
- steel strip /
- tension leveling /
- simulation /
- tension leveling technology

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 232
HTML全文瀏覽量: 104
PDF下載量: 8
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

x 關閉永久關閉

喜報|《工程科學學報》入選第6屆中國精品科技期刊！

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

啪啪啪视频