控軋過程中KQ450鋼的晶粒細化和析出物行為

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

控軋過程中KQ450鋼的晶粒細化和析出物行為

白元強, 劉春明, 邊建華, 邱利, 翟少巖, 方克明

文章導航 > 工程科學學報 > 1999 > 21(4): 345-348

白元強, 劉春明, 邊建華, 邱利, 翟少巖, 方克明. 控軋過程中KQ450鋼的晶粒細化和析出物行為[J]. 工程科學學報, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

引用本文:

白元強, 劉春明, 邊建華, 邱利, 翟少巖, 方克明. 控軋過程中KQ450鋼的晶粒細化和析出物行為[J]. 工程科學學報, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

Bai Yuanqiang, Liu Chunming, Bian Jianhua, Qiu Li, Zhai Shaoyan, Fang Keming. Grain Refinement and Precipitation Behavior in KQ450 Steels during Controlled Rolling[J]. Chinese Journal of Engineering, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

Citation:

Bai Yuanqiang, Liu Chunming, Bian Jianhua, Qiu Li, Zhai Shaoyan, Fang Keming. Grain Refinement and Precipitation Behavior in KQ450 Steels during Controlled Rolling[J]. Chinese Journal of Engineering, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

白元強, 劉春明, 邊建華, 邱利, 翟少巖, 方克明. 控軋過程中KQ450鋼的晶粒細化和析出物行為[J]. 工程科學學報, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

引用本文:

白元強, 劉春明, 邊建華, 邱利, 翟少巖, 方克明. 控軋過程中KQ450鋼的晶粒細化和析出物行為[J]. 工程科學學報, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

Bai Yuanqiang, Liu Chunming, Bian Jianhua, Qiu Li, Zhai Shaoyan, Fang Keming. Grain Refinement and Precipitation Behavior in KQ450 Steels during Controlled Rolling[J]. Chinese Journal of Engineering, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

Citation:

Bai Yuanqiang, Liu Chunming, Bian Jianhua, Qiu Li, Zhai Shaoyan, Fang Keming. Grain Refinement and Precipitation Behavior in KQ450 Steels during Controlled Rolling[J]. Chinese Journal of Engineering, 1999, 21(4): 345-348. doi: 10.13374/j.issn1001-053x.1999.04.008

控軋過程中KQ450鋼的晶粒細化和析出物行為

doi: 10.13374/j.issn1001-053x.1999.04.008

1. 北京科技大學材料科學與工程學院, 北京 100083;
2. 首都鋼鐵公司技術中心, 北京 100041;
3. 北京科技大學應用科學學院

作者簡介:
白元強女,工程師

中圖分類號: TG142.33
計量
- 文章訪問數: 239
- HTML全文瀏覽量: 75
- PDF下載量: 12
- 被引次數: 0
出版歷程
- 收稿日期: 1998-07-31
- 網絡出版日期: 2021-08-27

Grain Refinement and Precipitation Behavior in KQ450 Steels during Controlled Rolling

1. Material Science and Engineering School, UST Beijing, Beijing 100083, China;
2. Technology Center of Capital Iron and Steel Corp. Beijing 100041, China;
3. Applied Science School, UST Beijing, Beijing 100083, China

摘要: 通過定量金相、掃描電鏡、透射電鏡和X射線小角度散射方法研究KQ450微合金鋼在不同控制軋制條件下,工藝參數對其鐵素體晶粒細化和析出物行為的影響.結果表明:加熱溫度對KQ450微合金鋼晶粒粗化比較敏感;析出相是面心立方結構的NbC,VC和V(CN).析出物的平均尺寸隨冷卻速度的增大而減小.
- KQ450微合金鋼 /
- 控制軋制 /
- 鐵素體晶粒細化 /
- 析出物
Abstract: The effect of hot-working parameters on the ferrite grain refinement and Precipitation behavior of KQ450 steel during different controlled rolling have been investigated by means of quantitative metallography, SEM, TEM and X-ray small angle scatter analysis.The results show that heating temperature is susceptible to the ferrite grain size of KQ450 steel; the precipitated phases are NbC, VC and V(CN); With increasing cooling rate the average size of the precipitated phases decrease.
- KQ450 microalloy steel /
- controlled rolling /
- fetrite grain refinement /
- precipitated phase

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 239
HTML全文瀏覽量: 75
PDF下載量: 12
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

x 關閉永久關閉

喜報|《工程科學學報》入選第6屆中國精品科技期刊！

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

啪啪啪视频