鋼-鋁固液相復合中的分形

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

鋼-鋁固液相復合中的分形

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠

文章導航 > 工程科學學報 > 1999 > 21(3): 248-250

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠. 鋼-鋁固液相復合中的分形[J]. 工程科學學報, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

引用本文:

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠. 鋼-鋁固液相復合中的分形[J]. 工程科學學報, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong. Fractal on Steel-Aluminum Solid to Liquid Bonding[J]. Chinese Journal of Engineering, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

Citation:

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong. Fractal on Steel-Aluminum Solid to Liquid Bonding[J]. Chinese Journal of Engineering, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠. 鋼-鋁固液相復合中的分形[J]. 工程科學學報, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

引用本文:

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠. 鋼-鋁固液相復合中的分形[J]. 工程科學學報, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong. Fractal on Steel-Aluminum Solid to Liquid Bonding[J]. Chinese Journal of Engineering, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

Citation:

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong. Fractal on Steel-Aluminum Solid to Liquid Bonding[J]. Chinese Journal of Engineering, 1999, 21(3): 248-250. doi: 10.13374/j.issn1001-053x.1999.03.009

鋼-鋁固液相復合中的分形

doi: 10.13374/j.issn1001-053x.1999.03.009

1. 北京科技大學材料科學與工程學院, 北京 100083;
2. 東北大學壓力加工系, 沈陽 110006

基金項目:

國家“863”高科技資助(No.863-715-009-060)

作者簡介:
張鵬男,31歲,博士后

中圖分類號: TG111.91
計量
- 文章訪問數: 329
- HTML全文瀏覽量: 99
- PDF下載量: 6
- 被引次數: 0
出版歷程
- 收稿日期: 1998-06-12
- 網絡出版日期: 2021-08-27

Fractal on Steel-Aluminum Solid to Liquid Bonding

1. Material Science and Engineering School, UST Beijing, Beijing 100083, China;
2. Metal Forming Department Northeastern University, Shenyang 110006, China

摘要: 應用分形幾何理論確定了鋼-鋁固液相復合板鋼板打毛表面、剪切撕裂表面的分形維數及其與復合板界面剪切強度之間的關系.當鋼板打毛表面的分形維數為2.36時,剪切撕裂表面的最大分形維數為2.33,相應的最大界面剪切強度為65.3MPa.采用鋼絲直徑為1.4mm的鋼絲輪進行打毛處理是最佳打毛方式.
- 打毛表面 /
- 剪切撕裂表面 /
- 分形維數 /
- 界面剪切強度
Abstract: The relationship between fractal dimension of the 08Al steel plate blast sanded surface that of the steel-aluminium solid to liquid bonding plate shearing surface and interfacial shear strength was determined by using fractal theory.It was recieved that the maximum interfacial shear strength 65.3 MPa corresponded to the optimum fractal dimension 2.33 of the shearing surface of bonding plate,and the fractal dimension of the blast sanded surface of Steel plate Which was blast sanded by the wheel made by steel wire (diameter was 1.4mm) was 2.36.
- blast sanded surface /
- bonding plate shearing surface /
- fractal dimension /
- interfacial shear strength

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 329
HTML全文瀏覽量: 99
PDF下載量: 6
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

x 關閉永久關閉

喜報|《工程科學學報》入選第6屆中國精品科技期刊！

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"><option id="y4y0w"></option></table>

<noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>

<noscript id="y4y0w"><source id="y4y0w"></source></noscript>

<table id="y4y0w"></table><menu id="y4y0w"></menu>

<table id="y4y0w"><rt id="y4y0w"></rt></table>

啪啪啪视频