微機動態控制AOD爐精煉不銹鋼工藝

李學峰; 繆漢金; 郭家祺; 邵志剛; 王京明

doi:10.13374/j.issn1001-053x.1995.s1.004

李學峰, 繆漢金, 郭家祺, 邵志剛, 王京明. 微機動態控制AOD爐精煉不銹鋼工藝[J]. 工程科學學報, 1995, 17(S1): 17-21. DOI: 10.13374/j.issn1001-053x.1995.s1.004

引用本文:

李學峰, 繆漢金, 郭家祺, 邵志剛, 王京明. 微機動態控制AOD爐精煉不銹鋼工藝[J]. 工程科學學報, 1995, 17(S1): 17-21. DOI: 10.13374/j.issn1001-053x.1995.s1.004

Li Xuefeng, Mou Hanjin, Guo Jiaqi, Shao Zhigang, Wang Jingming. Kinetic Computer-Controlled Process Model for Stainless Refining in AOD Vessel[J]. Chinese Journal of Engineering, 1995, 17(S1): 17-21. DOI: 10.13374/j.issn1001-053x.1995.s1.004

Citation:

微機動態控制AOD爐精煉不銹鋼工藝

Kinetic Computer-Controlled Process Model for Stainless Refining in AOD Vessel

摘要

摘要: 介紹了太鋼18tAOD爐采用微機動態控制精煉不銹鋼的工藝模型及其應用。該模型可控制終點碳和溫度,使用該模型后提高了鉻的回收率.

Abstract: The kinetic computer-controlled process model and its application for the stainless steel refining in 18t AOD vessel at Taiyuan Iron and Steel Co.are presented. The carbon content and temperatrue at end point were controlled. The chromium yield was increased by use of the model.

HTML全文

參考文獻(0)

施引文獻

資源附件(0)

下載: 全尺寸圖片幻燈片

返回文章

用微信掃碼二維碼

分享至好友和朋友圈

啪啪啪视频