• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • LI Liansheng, ZHU Rong, GUO Hanjie, DONG Jie, LI Fenggong. Development of Non-leaded Free-Cutting Steel by Adding Tin[J]. Chinese Journal of Engineering, 2003, 25(4): 312-314. DOI: 10.13374/j.issn1001-053x.2003.04.006
    Citation: LI Liansheng, ZHU Rong, GUO Hanjie, DONG Jie, LI Fenggong. Development of Non-leaded Free-Cutting Steel by Adding Tin[J]. Chinese Journal of Engineering, 2003, 25(4): 312-314. DOI: 10.13374/j.issn1001-053x.2003.04.006
    shu

    Development of Non-leaded Free-Cutting Steel by Adding Tin

      Abstract
    • A type of non-leaded free cutting steel was developed by adding tin into steel melt. Machining tests and mechanical tests of the steel were conducted. The results showed that tin would improve the machinability of the steel when the tin content in the steel was less than 0.05%, and any negative influence was not found on the mechanical properties of the steel.
      • FullText(HTML)
    • loading
      • References (0)
      • Relative Articles
    • Supplements (0)

    Catalog

      /

      DownLoad:  Full-Size Img  PowerPoint
      Return
      Return
    • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
      <table id="y4y0w"><option id="y4y0w"></option></table>
    •  <li id="y4y0w"></li>
      <noscript id="y4y0w"></noscript>
      <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
      <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
      <menu id="y4y0w"></menu>
      <table id="y4y0w"><rt id="y4y0w"></rt></table>
      • 啪啪啪视频