Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills

Yan Xiaoqiang; Liu Fuli; Sun Fusen; Hu Kongbai; Xiao Jingshun

doi:10.13374/j.issn1001-053x.1999.03.021

Yan Xiaoqiang, Liu Fuli, Sun Fusen, Hu Kongbai, Xiao Jingshun. Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills[J]. Chinese Journal of Engineering, 1999, 21(3): 292-293. DOI: 10.13374/j.issn1001-053x.1999.03.021

Citation:

Yan Xiaoqiang, Liu Fuli, Sun Fusen, Hu Kongbai, Xiao Jingshun. Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills[J]. Chinese Journal of Engineering, 1999, 21(3): 292-293. DOI: 10.13374/j.issn1001-053x.1999.03.021

Citation:

Yan Xiaoqiang, Liu Fuli, Sun Fusen, Hu Kongbai, Xiao Jingshun. Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills[J]. Chinese Journal of Engineering, 1999, 21(3): 292-293. DOI: 10.13374/j.issn1001-053x.1999.03.021

Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills

Abstract

Abstract

The effects of friction moment and additional moment on the stability of rolls for the first time was considered and the optimum offset model for the four high mills was set up.

FullText(HTML)

References (0)

Relative Articles

Supplements (0)

Cited By

/

DownLoad: Full-Size Img PowerPoint

Return

啪啪啪视频

Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills

Abstract

Catalog

Export File

Citation

Format

Content