Microstructure Modelling for Phase Transformation in Low Carbon Steel

Zhao Hui; Lu Shouli; Gao Ying; Dou Xiaofeng

doi:10.13374/j.issn1001-053x.1998.03.037

Volume 20 Issue 3

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1998 > 20(3): 277-280

Zhao Hui, Lu Shouli, Gao Ying, Dou Xiaofeng. Microstructure Modelling for Phase Transformation in Low Carbon Steel[J]. Chinese Journal of Engineering, 1998, 20(3): 277-280. doi: 10.13374/j.issn1001-053x.1998.03.037

Citation:

Zhao Hui, Lu Shouli, Gao Ying, Dou Xiaofeng. Microstructure Modelling for Phase Transformation in Low Carbon Steel[J]. Chinese Journal of Engineering, 1998, 20(3): 277-280. doi: 10.13374/j.issn1001-053x.1998.03.037

Citation:

PDF( 416 KB)

Microstructure Modelling for Phase Transformation in Low Carbon Steel

doi: 10.13374/j.issn1001-053x.1998.03.037

Material Science and Engineering School, UST Beijing, Beijing 100083, China

Received Date: 1997-09-25
Available Online: 2021-08-27

Abstract

Abstract

The microstructures of phase transformation by using quntitative metallogra phy was studied. On the basis of analyzing the effects on the microstructures of phase transformation the model of transformation kinetics X=1-exp(-0.642t^0.086), and the model of ferrite grain size D_α=5.7×D_γ^0.46×C_r^-0.26 are constructed and obtained.
- hot rolling,
- phase transformation,
- model,