• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>

    • column
    Research situation of the disaster-causing mechanism of tailing dams and its developing trend
    LI Zhang-hong, BU Lei, CHEN Long-gen
    2016, 38(8): 1039-1049. DOI: 10.13374/j.issn2095-9389.2016.08.001
    Abstract PDF
    Multi-field coupling numerical simulation heat accumulation zones in gob areas of the crossheading effect on oxidization and heat accumulation zones in gob areas
    ZHANG Ying-hua, ZHOU Pei-ling, HUANG Zhi-an, GAO Yu-kun, YUAN Fei
    2016, 38(8): 1050-1058. DOI: 10.13374/j.issn2095-9389.2016.08.002
    Abstract PDF
    Prediction of cemented backfill strength by ultrasonic pulse velocity and BP neural network
    XU Miao-fei, GAO Yong-tao, JIN Ai-bing, ZHOU Yu, GUO Li-jie, LIU Guang-sheng
    2016, 38(8): 1059-1068. DOI: 10.13374/j.issn2095-9389.2016.08.003
    Abstract PDF
    Application of a spiral pipe in a low stowing gradient backfilling pipeline and amendment of stowing gradient
    MOU Hong-wei, Lü Wen-sheng, YANG Peng
    2016, 38(8): 1069-1074. DOI: 10.13374/j.issn2095-9389.2016.08.004
    Abstract PDF
    Ultrasonic velocity and acoustic emission properties of concrete eroded by sulfate and its damage mechanism
    LIU Juan-hong, ZHAO Li, SONG Shao-min, JI Hong-guang
    2016, 38(8): 1075-1081. DOI: 10.13374/j.issn2095-9389.2016.08.005
    Abstract PDF
    Desulfurization and denitration of sintering flue gas by blast furnace process
    WEI Fu-hao, LIU Jian-hua, JI Yi-long, LI Kang-wei, LIU Hong-bo, LIU Jian
    2016, 38(8): 1082-1090. DOI: 10.13374/j.issn2095-9389.2016.08.006
    Abstract PDF
    Computation method of gas-liquid interfacial area based on numerical simulation results
    SONG Yan-po, LIU Zhi-gao, TAO Yan-ming, PENG Xiao-qi, CHEN Zhuo
    2016, 38(8): 1091-1097. DOI: 10.13374/j.issn2095-9389.2016.08.007
    Abstract PDF
    Coupling numerical simulation of flow field,temperature field and stress field in a wide-thick slab continuous casting mold
    HUANG Cheng, LI Xiao-qian, CHEN Ping-hu, XU Ting
    2016, 38(8): 1098-1107. DOI: 10.13374/j.issn2095-9389.2016.08.008
    Abstract PDF
    Influence of vanadium on the microstructure refinement of high strength automobile beam steel
    LI Yong-liang, WANG Fu-ming, LI Zhang-rong, YANG Zhan-bing, HE Yu-tian, ZHENG Ya-xu
    2016, 38(8): 1108-1114. DOI: 10.13374/j.issn2095-9389.2016.08.009
    Abstract PDF
    Effect of TMCP on the microstructure and mechanical properties of Si-Mn series hainitic steel
    LI Ming-bao, HU Shui-ping
    2016, 38(8): 1115-1122. DOI: 10.13374/j.issn2095-9389.2016.08.010
    Abstract PDF
    Effect of Mg on the solidification structure and growth of the intermetallic layer of a Zn-11% Al alloy coating
    LI Kai-liang, WU Zhang-jun, PENG Hao-ping, LIU Ya, SU Xu-ping, WANG Jian-hua
    2016, 38(8): 1123-1131. DOI: 10.13374/j.issn2095-9389.2016.08.011
    Abstract PDF
    Effect of cooling rate on the microstructure and corrosion properties of Zn-5Al-0.1RE-xSi alloys
    TU Hao, WEI Da-sheng, ZHOU Sheng-jie, LIU Ya, WU Zhang-jun, SU Xu-ping, WANG Jian-hua
    2016, 38(8): 1132-1138. DOI: 10.13374/j.issn2095-9389.2016.08.012
    Abstract PDF
    Electrocatalytic performance of spherical NiO for ethanol oxidation
    ZHAN Jing, LU Er-ju, CAI Meng, MA Ya-lin
    2016, 38(8): 1139-1144. DOI: 10.13374/j.issn2095-9389.2016.08.013
    Abstract PDF
    Influence of Cr3C2 content on the wear properties of Cr3C2/Ni3Al composites
    FU Li-hua, HAN Wei, XIE Yan-jun, LI Zhang-hai, DONG Chao-fang, ZHAO Lin, TIAN Zhi-ling
    2016, 38(8): 1145-1152. DOI: 10.13374/j.issn2095-9389.2016.08.014
    Abstract PDF
    Compression behavior and energy-absorption characteristic of aluminum honeycomb material with polyurethane filler
    SONG Yu-huan, XIAO Jiu-mei
    2016, 38(8): 1153-1159. DOI: 10.13374/j.issn2095-9389.2016.08.015
    Abstract PDF
    Wall-thickness reduction of AP1000 primary coolant pipes subjected to cold roll-forming
    WANG Peng, YANG Bin, WANG Sheng-long, ZHAO Tian-ming
    2016, 38(8): 1160-1167. DOI: 10.13374/j.issn2095-9389.2016.08.016
    Abstract PDF
    Improving the wall thinning of the transition shoulder with anti-wedge upset rolling in cross wedge rolling hollow parts
    YANG Cui-ping, ZHANG Kang-sheng, HU Zheng-huan
    2016, 38(8): 1168-1174. DOI: 10.13374/j.issn2095-9389.2016.08.017
    Abstract PDF
    Numerical simulation of self-sustained oscillations in flow past a louver
    ZHANG Yong-chang, XU Yu-gong, CHEN Xiang-dong, ZHU Yi-fei
    2016, 38(8): 1175-1181. DOI: 10.13374/j.issn2095-9389.2016.08.018
    Abstract PDF
    Influence characteristics of the degree of flattening on the performance of double-P type radiant tubes studied by CFD simulation
    FENG Jun-xiao, CHEN Yan-mei, LIU Xing-jie, WU Qi-ming
    2016, 38(8): 1182-1189. DOI: 10.13374/j.issn2095-9389.2016.08.019
    Abstract PDF
    Scheduling method for dual-blade cluster tools with parallel chambers and reentrancy constraints
    ZHOU Bing-hai, LI Ming, SU Yi
    2016, 38(8): 1190-1195. DOI: 10.13374/j.issn2095-9389.2016.08.020
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • 啪啪啪视频