• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>

    • column
    Post-construction settlement and creep law of waste dumps
    ZHANG Yuan-sheng, GAO Yong-tao, WU Shun-chuan, ZHANG Tai-bao, TIAN Shu-guang
    2016, 38(6): 745-753. DOI: 10.13374/j.issn2095-9389.2016.06.001
    Abstract PDF
    Inhibition mechanism of iron mineral reduction in high iron type laterite nickel ore with the addition of sodium sulfate
    GAO En-xia, LIU Zhi-guo, SUN Ti-chang, WANG Xiao-ping
    2016, 38(6): 754-759. DOI: 10.13374/j.issn2095-9389.2016.06.002
    Abstract PDF
    Leaching kinetic of copper oxide ore containing carbonate gangue in the acid condition
    WU Ai-xiang, HU Kai-jian, WANG Yi-ming, WANG Shao-yong, XU Heng
    2016, 38(6): 760-766. DOI: 10.13374/j.issn2095-9389.2016.06.003
    Abstract PDF
    Electrochemical behavior of the super high strength aluminum alloy as a cathode in zinc electrodeposition
    LI Tao, HUANG Hui, GUO Zhong-cheng
    2016, 38(6): 767-772. DOI: 10.13374/j.issn2095-9389.2016.06.004
    Abstract PDF
    Distribution characteristic and formation process of bubbles in foaming slag in a converter
    LI Xiang, BAO Yan-ping, WANG Min, LIN Lu
    2016, 38(6): 773-779. DOI: 10.13374/j.issn2095-9389.2016.06.005
    Abstract PDF
    Formation mechanism of oversized DS-type inclusions in low oxygen special steel
    JIANG Min, WANG Kun-peng, HOU Ze-wang, WANG Xin-hua
    2016, 38(6): 780-786. DOI: 10.13374/j.issn2095-9389.2016.06.006
    Abstract PDF
    Comparison between the microstructures of M2 steel cast by the water-cooled copper mould and the sand mould
    ZHAO Zhi-gang, CHOU Sheng-tao, ZHU Rong
    2016, 38(6): 787-794. DOI: 10.13374/j.issn2095-9389.2016.06.007
    Abstract PDF
    Hot ductility and fracture mechanism of Fe-22Mn-0.7C TWIP steel
    LAN Peng, TANG Hai-yan, JI Yuan, DU Chen-wei, ZHANG Jia-quan
    2016, 38(6): 795-804. DOI: 10.13374/j.issn2095-9389.2016.06.008
    Abstract PDF
    Hot ductility and fracture mechanism of a Ti-bearing microalloyed steel
    YANG Xiao-gang, ZHANG Li-feng, REN Ying, LI Shu-sen, LI Ming
    2016, 38(6): 805-811. DOI: 10.13374/j.issn2095-9389.2016.06.009
    Abstract PDF
    Deformation and recrystallization texture features of medium temperature reheated grain oriented silicon steel containing copper
    LIU Gong-tao, LI Hai-jiao, YANG Ping, MAO Wei-min
    2016, 38(6): 812-819. DOI: 10.13374/j.issn2095-9389.2016.06.010
    Abstract PDF
    Effect of hot forming temperature on the microstructure and mechanical properties of high strength square tubes
    PENG Xue-feng, HAN Jing-tao, YAN Pei-jie, WANG Yu
    2016, 38(6): 820-826. DOI: 10.13374/j.issn2095-9389.2016.06.011
    Abstract PDF
    Indentation effect on the fatigue limit of axle steel
    GAO Jie-wei, DAI Guang-ze, ZHAO Jun-wen, LI Heng-kui, XU Lei
    2016, 38(6): 827-833. DOI: 10.13374/j.issn2095-9389.2016.06.012
    Abstract PDF
    Preparation of SiC/Al2O3 composite materials from coal fly ash
    LI Zi-yong, WU Chun-han, YU Qing-chun, ZHOU Yue-zhen, LI Wei, YANG Bin
    2016, 38(6): 834-840. DOI: 10.13374/j.issn2095-9389.2016.06.013
    Abstract PDF
    Analysis on the fracture failure in crack interaction of mortar using the phase-field method
    HOU Yue, GE Zhi, ZHOU Jian, SUN Feng-yan, SUN Wen-juan
    2016, 38(6): 841-846. DOI: 10.13374/j.issn2095-9389.2016.06.014
    Abstract PDF
    Molecular dynamics simulation of micro frictional contact characteristics between tires and asphalt pavement
    SUN Feng-yan, HUANG Lu, WANG Lin-bing
    2016, 38(6): 847-852. DOI: 10.13374/j.issn2095-9389.2016.06.015
    Abstract PDF
    Determination of low concentration naphthalene adsorption isotherms on SBA-15
    LIU Ying-shu, JIANG Li-jun, LI Zi-yi, WANG Zhan-ying, YANG Xiong, YANG Quan
    2016, 38(6): 853-860. DOI: 10.13374/j.issn2095-9389.2016.06.016
    Abstract PDF
    Online performance prediction of CCPP byproduct coal-gas system based on online sequential extreme learning machine
    CHU Fei, YE Jun-feng, MA Xiao-ping, ZHANG Shu-ning, WU Qi
    2016, 38(6): 861-866. DOI: 10.13374/j.issn2095-9389.2016.06.017
    Abstract PDF
    Manipulator dynamic modeling and motion planning for live working robot
    JIANG Wei, WU Gong-ping, WANG Wei, ZHANG Jie
    2016, 38(6): 867-875. DOI: 10.13374/j.issn2095-9389.2016.06.018
    Abstract PDF
    Extraction of blurred infrared targets based on a manifold regularized multiple-kernel model
    YANG Dao, FU Dong-mei
    2016, 38(6): 876-885. DOI: 10.13374/j.issn2095-9389.2016.06.019
    Abstract PDF
    Categorization and regression algorithm based on the quantitative association rule tree
    WANG Ling, LI Shu-lin, WU Lu-lu
    2016, 38(6): 886-892. DOI: 10.13374/j.issn2095-9389.2016.06.020
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • 啪啪啪视频