• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • column
    Flow characteristics of argon bottom blowing in an ellipse ladle
    NGUYEN Van-khang, BAO Yan-ping, WANG Min, LIN Lu, LI Xiang
    2014, 36(S1): 1-5. DOI: 10.13374/j.issn1001-053x.2014.s1.001
    Abstract PDF
    Thermodynamic study on the effect of Nb-V alloy on the nitrogen solubility in HRB400 steel
    MA Yu, LI Jing-she, LIU Wei, SUN Li-yuan, YANG Shu-feng, ZHAO Ming
    2014, 36(S1): 6-9. DOI: 10.13374/j.issn1001-053x.2014.s1.002
    Abstract PDF
    Evolution of surface porosity in round steel hot rolling
    MAO Xiao-hui, ZHANG Jiang-shan, YANG Shu-feng
    2014, 36(S1): 10-14. DOI: 10.13374/j.issn1001-053x.2014.s1.003
    Abstract PDF
    Effect of oxygen lance position on the flow velocity of molten steel in BOF
    LI Zhi-zheng, ZHU Rong, LIU Run-zao, Lü Ming, WANG Hui-zhi
    2014, 36(S1): 15-20. DOI: 10.13374/j.issn1001-053x.2014.s1.004
    Abstract PDF
    Effect of different coating binders on the high-temperature heat-insulating properties of heat insulating coatings
    CAO Guang-yuan, GUO Han-jie, LI Lin, LI Hong-liang, GUO Chuang
    2014, 36(S1): 21-26. DOI: 10.13374/j.issn1001-053x.2014.s1.005
    Abstract PDF
    Leaching and carbonation of steelmaking slag
    TANG Hai-yan, MENG Wen-jia, SUN Shao-heng, LIU Hui, WANG Shuang, LI Jing-she
    2014, 36(S1): 27-31. DOI: 10.13374/j.issn1001-053x.2014.s1.006
    Abstract PDF
    Cleanliness study of IF steel by holding in ladles after RH vacuum process
    CUI Heng, TIAN En-hua, CHEN Bin, QING Jing, WANG Wei
    2014, 36(S1): 32-35. DOI: 10.13374/j.issn1001-053x.2014.s1.007
    Abstract PDF
    Decarburization and denitrogenation in VOD process for ultra clean ferritic stainless steel
    XU Ying-tie, CHEN Zhao-ping, LI Shi
    2014, 36(S1): 36-40. DOI: 10.13374/j.issn1001-053x.2014.s1.008
    Abstract PDF
    Parameter optimization of aluminum wire feeding process during LF refining
    ZHANG Peng, CHENG Shu-sen, CHEN Chuan
    2014, 36(S1): 41-46. DOI: 10.13374/j.issn1001-053x.2014.s1.009
    Abstract PDF
    Mathematical model for the AOD oxidation refining process of low carbon TWIP steel
    ZHANG Ping, LIU Jian-hua, ZHUANG Chang-ling, ZHANG Qing-lei, LEI Chong, WANG Zi-jun
    2014, 36(S1): 47-52. DOI: 10.13374/j.issn1001-053x.2014.s1.010
    Abstract PDF
    Physical simulation of refining process optimization for bottom argon blowing in a 250 t ladle
    ZHENG Wan, TU Hao, LI Guang-qiang, SHEN Xing, XU Yun-long, ZHU Cheng-yi, LU Kai
    2014, 36(S1): 53-59. DOI: 10.13374/j.issn1001-053x.2014.s1.011
    Abstract PDF
    Process capability optimization of temperature control in high-carbon steel production by BOF process
    XING Mei-luan, BAO Yan-ping, LIN Lu
    2014, 36(S1): 60-64. DOI: 10.13374/j.issn1001-053x.2014.s1.012
    Abstract PDF
    Thermodynamic analysis on the minimum oxygen content in molten steel using aluminum and carbon
    LI Ning, GUO Han-jie
    2014, 36(S1): 65-71. DOI: 10.13374/j.issn1001-053x.2014.s1.013
    Abstract PDF
    Corrosion behaviors of RE heavy rail in simulated industrial atmosphere
    WANG Xiao-li, SONG Bo, AN Sheng-li, FU Guo-ping, PENG Jun
    2014, 36(S1): 72-76. DOI: 10.13374/j.issn1001-053x.2014.s1.014
    Abstract PDF
    Effect of Mn/S on sulfide inclusions in non-quenched and tempered steel containing sulfur
    WU Hua-jie, YUE Feng, YOU Da-li, LU Peng-yan, LIU Jing, CHEN Wei-wei, ZHOU Lei
    2014, 36(S1): 77-82. DOI: 10.13374/j.issn1001-053x.2014.s1.015
    Abstract PDF
    Large eddy simulation of turbulent flow in a continuous casting mold
    AN Li-na, LI Jing-she, GE Dong, CHENG Ai-min, JI Chuan-bo, SUN Li-yuan
    2014, 36(S1): 83-88. DOI: 10.13374/j.issn1001-053x.2014.s1.016
    Abstract PDF
    Analysis of the surface crack on casting bloom of low carbon and high manganese steel
    SUN Yan-hui, XU Rui, CENG Ya-nan, AI Xi
    2014, 36(S1): 89-92. DOI: 10.13374/j.issn1001-053x.2014.s1.017
    Abstract PDF
    Experimental study on the coal-based method to deal with pyrite cinder for preparing sulfur-bearing steel
    GUO Ya-guang, ZHU Rong, WU En-hui, WANG Yun, LIN Teng-chang, XIAO Yi
    2014, 36(S1): 93-97. DOI: 10.13374/j.issn1001-053x.2014.s1.018
    Abstract PDF
    Simulation on fluid flow in a slab continuous casting mould
    YANG Jing-bo, LI Jing-she, ZHANG Jiang-shan, GAO Xiang-zhou, YANG Shu-feng
    2014, 36(S1): 98-103. DOI: 10.13374/j.issn1001-053x.2014.s1.019
    Abstract PDF
    Alloy charging optimization model based on the yield dynamic libraries
    YANG Ling-zhi, WANG Xue-yi, WANG Zhi-dong, WANG Zhen-xiang
    2014, 36(S1): 104-109. DOI: 10.13374/j.issn1001-053x.2014.s1.020
    Abstract PDF
    Research on the heat supply of different sections in a rotary hearth furnace
    GAO Jin-tao, ZHOU Chun-fang, ZHU Rong, LIU Run-zao
    2014, 36(S1): 110-116. DOI: 10.13374/j.issn1001-053x.2014.s1.021
    Abstract PDF
    Water modeling study on the bottom blowing of N2 in a ferrovanadium electric arc furnace
    LIU Wen-juan, DONG Kai, WANG Rao
    2014, 36(S1): 117-121. DOI: 10.13374/j.issn1001-053x.2014.s1.022
    Abstract PDF
    Analysis of Si volatilization during the BOF steelmaking process using limestone for slagging
    NIAN Wu, FENG Jia, LI Chen-xiao, SONG Wen-chen, LI Hong
    2014, 36(S1): 122-125. DOI: 10.13374/j.issn1001-053x.2014.s1.023
    Abstract PDF
    Thermodynamic optimization of the CaO-Al2O3-SiO2-MgO slag system
    TIAN Dong-dong, ZHANG Yan-ling, LIU Qing-bo, WEN Xin-shu
    2014, 36(S1): 126-132. DOI: 10.13374/j.issn1001-053x.2014.s1.024
    Abstract PDF
    Effect of Mn and Si on the microstructure and mechanical properties of medium manganese hot-rolled high-strength steel
    ZHAO Zheng-zhi, TONG Ting-ting, ZHAO Ai-min, YIN Hong-xiang, LI Shuang-jiao, LIANG Ju-hua
    2014, 36(S1): 133-139. DOI: 10.13374/j.issn1001-053x.2014.s1.025
    Abstract PDF
    Physical modeling of argon bottom blowing refining in a 100 t ladle
    ZHAO Li-hua, MA Wen-jun, WANG Min
    2014, 36(S1): 140-144. DOI: 10.13374/j.issn1001-053x.2014.s1.026
    Abstract PDF
    Effects of Zr on the solidification structure and hot ductility of Fe-36Ni invar alloy
    ZHENG Hong-guang, LI Yuan, LIU Xu-feng
    2014, 36(S1): 145-150. DOI: 10.13374/j.issn1001-053x.2014.s1.027
    Abstract PDF
    Nitrogen alloying behavior of 316 L stainless steel
    SHI Yan-lin, BAO Yan-ping, CUI Heng, CHEN Ya-nan
    2014, 36(S1): 151-155. DOI: 10.13374/j.issn1001-053x.2014.s1.028
    Abstract PDF
    Simulation on influence of MgO content on liquid phase in CaO-SiO2-Al2O3-MgO slag
    LIN Teng-chang, ZHU Rong, WANG Cheng-jie, LI Chao, LI Ming-gang
    2014, 36(S1): 156-161. DOI: 10.13374/j.issn1001-053x.2014.s1.029
    Abstract PDF
    Source analysis on high SiO2 inclusions in interstitial free(IF) steel slab
    WANG Min, YANG Quan
    2014, 36(S1): 162-167. DOI: 10.13374/j.issn1001-053x.2014.s1.030
    Abstract PDF
    Study on CaO and CaS inclusions in pipeline steel during refining process
    LI Shu-sen, REN Ying, ZHANG Li-feng, YANG Wen
    2014, 36(S1): 168-172. DOI: 10.13374/j.issn1001-053x.2014.s1.031
    Abstract PDF
    Inclusion morphology control of soft-killed deoxidation spring steel
    QI Jiang-hua, WU Chao, LUO De-xin, YANG Cheng-wei, QU Tie
    2014, 36(S1): 173-176. DOI: 10.13374/j.issn1001-053x.2014.s1.032
    Abstract PDF
    Influence of Al2O3 content on inclusions in spring steel
    ZHOU Li, WANG Xiang-hong
    2014, 36(S1): 177-181. DOI: 10.13374/j.issn1001-053x.2014.s1.033
    Abstract PDF
    Analysis on inclusions in bearing steels
    YANG Wen, ZHANG Li-feng, HU Yu-xin, FAN Fu-hua, LI Guo-guang
    2014, 36(S1): 182-188. DOI: 10.13374/j.issn1001-053x.2014.s1.034
    Abstract PDF
    Mechanism of modifying oxide and sulphide by Mg in liquid iron at 1873 K
    ZHANG Tong-sheng, WANG De-yong, LIU Cheng-jun, JIANG Mao-fa, Lü Ming, WANG Bo
    2014, 36(S1): 189-193. DOI: 10.13374/j.issn1001-053x.2014.s1.035
    Abstract PDF
    Optimization of refining slag composition for low carbon low silicon Al-killed steel during CSP process
    GUO Jing, CHENG Shu-sen, CHENG Zi-jian, ZHANG Peng
    2014, 36(S1): 194-199. DOI: 10.13374/j.issn1001-053x.2014.s1.036
    Abstract PDF
    On-line liquid steel temperature control for the steelmaking-continuous casting process
    HE Dong-feng, HE Fei, XU An-jun, TIAN Nai-yuan
    2014, 36(S1): 200-206. DOI: 10.13374/j.issn1001-053x.2014.s1.037
    Abstract PDF
    Practice of double slag deep dephosphorization technology in combined blown converter
    HU Xiao-guang, LI Jing, WU He, ZHOU Chao-gang, CAI Ke-sen, WU Guo-ping
    2014, 36(S1): 207-212. DOI: 10.13374/j.issn1001-053x.2014.s1.038
    Abstract PDF
    Study on improvement in uniformity of a multi-strand tundish
    XIE Wen-xin, BAO Yan-ping, WANG Min, ZHANG Li-qiang, LI Rui
    2014, 36(S1): 213-217. DOI: 10.13374/j.issn1001-053x.2014.s1.039
    Abstract PDF
    Analysis of causes for surface tarnishing of 304 pickling plate
    CHEN Pei-dun, TANG Xu-wei, LI Chao, ZHANG Shuang, WU Yue-long
    2014, 36(S1): 218-221. DOI: 10.13374/j.issn1001-053x.2014.s1.040
    Abstract PDF
    Study on the bottom blowing of N2 in an EAF producing ferrovanadium by water modeling
    DONG Kai, LIU Run-zao, WANG Rao, LIU Wen-juan, ZHOU Chun-fang
    2014, 36(S1): 222-225. DOI: 10.13374/j.issn1001-053x.2014.s1.041
    Abstract PDF
    Influence of bottom blowing CO2 in LF on molten steel quality and erosion of ventilated bricks
    DONG Kai, ZHU Rong, LIU Run-zao, WANG Huan, ZHOU Chun-fang
    2014, 36(S1): 226-229. DOI: 10.13374/j.issn1001-053x.2014.s1.042
    Abstract PDF
    Effect of Mn/S on sulfide inclusions in non-quenched and tempered steel containing sulfur
    WU Hua-jie, LU Peng-yan, YUE Feng, ZHOU Lei, CHEN Wei-wei, YOU Da-li
    2014, 36(S1): 230-234. DOI: 10.13374/j.issn1001-053x.2014.s1.043
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • 啪啪啪视频