• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>

    • column
    Further development of paste definition from the viewpoint of yield tress
    WANG Yong, WU Ai-xiang, WANG Hong-jiang, YANG Xi-xiang, ZHOU Fa-lu, ZHOU Bo
    2014, 36(7): 855-860. DOI: 10.13374/j.issn1001-053x.2014.07.001
    Abstract PDF
    Thermodynamics and kinetics of Fe(CN)64- adsorption onto 201×7 resin
    DANG Xiao-e, Lü Jun, ZHOU Jun, TANG Chen, BIAN Dao-chao
    2014, 36(7): 861-866. DOI: 10.13374/j.issn1001-053x.2014.07.002
    Abstract PDF
    Phosphorus removal of oolitic high-phosphorus iron ore using biomass char
    TANG Hui-qing, FAN Li-qiang, MA Long, GUO Zhan-cheng
    2014, 36(7): 867-874. DOI: 10.13374/j.issn1001-053x.2014.07.003
    Abstract PDF
    Separation and extraction of amphoteric metals from waste printed circuit board powders by low-temperature alkaline smelting
    LIU Jing-xin, GUO Xue-yi, TIAN Qing-hua, LI Dong
    2014, 36(7): 875-879. DOI: 10.13374/j.issn1001-053x.2014.07.004
    Abstract PDF
    Effect of ladle change process on the surface cleanliness of IF steel continuous casting slabs
    DENG Xiao-xuan, WANG Xin-hua, LI Lin-ping, WEI Peng-yuan, JI Chen-xi, CENG Zhi, TIAN Zhi-hong
    2014, 36(7): 880-886. DOI: 10.13374/j.issn1001-053x.2014.07.005
    Abstract PDF
    Effect of molding parameters on porosity distribution in Fe-Ni alloy ingots under vacuum circumstance
    GAO Chen, ZHANG Li-feng, LI Chong-wei, PENG Jie
    2014, 36(7): 887-894. DOI: 10.13374/j.issn1001-053x.2014.07.006
    Abstract PDF
    Precipitation behaviors of carbides in H13 steel during ESR, forging and tempering
    NING An-gang, GUO Han-jie, CHEN Xi-chun, SUN Xiao-lin
    2014, 36(7): 895-902. DOI: 10.13374/j.issn1001-053x.2014.07.007
    Abstract PDF
    Nanoindentation characterization of non-metallic inclusions in free cutting steel
    WANG Yu-nan, BAO Yan-ping, WANG Min
    2014, 36(7): 903-909. DOI: 10.13374/j.issn1001-053x.2014.07.008
    Abstract PDF
    Recrystallization behaviors of FGH98 alloy
    LI Xin, ZHANG Mai-cang, LI Wei, DONG Jian-xin, ZHENG Lei, YAO Zhi-hao
    2014, 36(7): 910-918. DOI: 10.13374/j.issn1001-053x.2014.07.009
    Abstract PDF
    Cyclic deformation mechanism of a high-Nb TiAl alloy at high temperature
    ZHANG Min, LI Hong-liang, SONG Xi-ping, YU Long, JIAO Ze-hui, YU Hui-chen
    2014, 36(7): 919-924. DOI: 10.13374/j.issn1001-053x.2014.07.010
    Abstract PDF
    Unified constitutive model of TA15 titanium alloy in hot deformation based on the globularization mechanism
    ZHAO Hui-jun, WANG Bao-yu, LIU Gang, YANG Lei
    2014, 36(7): 925-930. DOI: 10.13374/j.issn1001-053x.2014.07.011
    Abstract PDF
    Preparation and supercapacitive performance of high-quality graphene material
    ZHANG Yong, CHEN Teng-fei, ZHANG Jian, HUANG Shu-rong, GAO Hai-li, WANG Li-zhen, SONG Yan-hua, ZHANG Lin-sen, LI Xiao-feng
    2014, 36(7): 931-937. DOI: 10.13374/j.issn1001-053x.2014.07.012
    Abstract PDF
    Fabrication of polystyrene binary colloidal crystals by vertical deposition
    WANG Xiao-dong, YI Gui-yun, ZHAO Pei-na, SUN Zheng-lin, JIAO Ling, CAO Jian-liang, SUN Guang, MENG Ha-ri-ba-la, ZHANG Zhan-ying
    2014, 36(7): 938-945. DOI: 10.13374/j.issn1001-053x.2014.07.013
    Abstract PDF
    Properties of Ti-coated diamond-reinforced glass matrix composites
    TONG Zhen-song, SHEN Zhuo-shen, XING Yi
    2014, 36(7): 946-951. DOI: 10.13374/j.issn1001-053x.2014.07.014
    Abstract PDF
    A method for plotting the on-line thermal map of a continuous casting mould
    HE Fei, HE Dong-feng, XU An-jun, WANG Hong-bing, TIAN Nai-yuan, CHANG Sheng, BU Gang
    2014, 36(7): 952-958. DOI: 10.13374/j.issn1001-053x.2014.07.015
    Abstract PDF
    Effect of process parameters on the end scrap of no-step-end workpieces by cross wedge rolling
    YANG Guang, ZHANG Kang-sheng, DUAN Wan-ze, HU Zheng-huan
    2014, 36(7): 959-965. DOI: 10.13374/j.issn1001-053x.2014.07.016
    Abstract PDF
    Fire rescue and optimal escape route algorithm based on refuge chambers
    ZHAN Zi-na, JIN Long-zhe, BAI Nan, WANG Yi
    2014, 36(7): 966-971. DOI: 10.13374/j.issn1001-053x.2014.07.017
    Abstract PDF
    Emergency decision-making method based on the cloud model
    XIA Deng-you, QIAN Xin-ming, KANG Qing-chun, DUAN Zai-peng
    2014, 36(7): 972-978. DOI: 10.13374/j.issn1001-053x.2014.07.018
    Abstract PDF
    Bandwidth scheduling of a networked learning control system using particle swarm optimization and the game theory
    YAN Xiang, LI Hong-bo, WANG Li-de, SHEN Ping
    2014, 36(7): 979-985. DOI: 10.13374/j.issn1001-053x.2014.07.019
    Abstract PDF
    Experimental study on the structural performance of a three-dimensional arch structure
    MOU Zai-gen, RAN Peng-fei, LIU Guo-yue, ZHANG Xiang-yong
    2014, 36(7): 986-992. DOI: 10.13374/j.issn1001-053x.2014.07.020
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • 啪啪啪视频