• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>

    • column
    Underground segmentation point hydraulic fracturing antireflection for low-permeability coal seams
    YANG Hong-wei
    2012, 34(11): 1235-1239. DOI: 10.13374/j.issn1001-053x.2012.11.003
    Abstract PDF
    Research on complex dust suppressants for transport roadways in open mines
    XIE Zhen-hua, LI Xiao-chao
    2012, 34(11): 1240-1244. DOI: 10.13374/j.issn1001-053x.2012.11.004
    Abstract PDF
    Removal of Zn ions from mine water by coagulation precipitation
    HUANG Guo-zhong, ZHANG Zhong-yuan, YU Yang-xian, YANG Wei-zhong, WEI Fang-jing, LI Deng-kun, ZHANG Li-min
    2012, 34(11): 1245-1249. DOI: 10.13374/j.issn1001-053x.2012.11.018
    Abstract PDF
    Studies on the electrical conductivities and diffusion coefficients of ions in CaO-Al2O3-SiO2 melt
    ZHANG Guo-hua, XUE Qing-guo, LI Li-fen, LI Fu-shen, ZHOU Guo-zhi
    2012, 34(11): 1250-1255. DOI: 10.13374/j.issn1001-053x.2012.11.011
    Abstract PDF
    Effect of deoxidation methods on inclusions in steel
    DENG Zhi-yin, ZHU Miao-yong, ZHONG Bao-jun, GAO Xin-liang
    2012, 34(11): 1256-1261. DOI: 10.13374/j.issn1001-053x.2012.11.012
    Abstract PDF
    Modification of non-metallic inclusions in high-strength low-alloy steel
    LI Qiang, WANG Xin-hua, LI Hai-bo, HUANG Fu-xiang, ZHU Guo-sen, JIANG Min, WANG Wan-jun
    2012, 34(11): 1262-1267. DOI: 10.13374/j.issn1001-053x.2012.11.013
    Abstract PDF
    Separation technology of Fe and Zn from blast furnace dust at non-molten state
    GAO Jin-tao, LI Shi-qi, ZHANG Yan-ling, ZHANG Yan-ting, CHEN Pei-yu, WANG Yu-gang
    2012, 34(11): 1268-1274. DOI: 10.13374/j.issn1001-053x.2012.11.014
    Abstract PDF
    Fluid flow and magnetic field in the secondary cooling zone of thin slabs with linear electromagnetic stirring
    SONG Xiao-peng, CHENG Shu-sen, ZHANG Li-jun, CHENG Zi-jian, ZHANG Peng, ZHANG Zhi-hua
    2012, 34(11): 1275-1281. DOI: 10.13374/j.issn1001-053x.2012.11.015
    Abstract PDF
    Corrosion behavior of low-alloy weathering steel in environment containing chloride ions
    GAO Xin-liang, FU Gui-qin, ZHU Miao-yong, DENG Zhi-yin
    2012, 34(11): 1282-1287. DOI: 10.13374/j.issn1001-053x.2012.11.005
    Abstract PDF
    Optimization algorithm based on LabVIEW parallel operation and its application in Ni-Ti alloy wire dieless drawing
    ZHANG Hong-gang, JIANG Yan-bin, ZHANG Zhi-hao, XIE Jian-xin
    2012, 34(11): 1294-1300. DOI: 10.13374/j.issn1001-053x.2012.11.007
    Abstract PDF
    Rolling process and properties of copper cladding aluminum flat bars using continuous casting bars with the rectangle section
    WU Yong-fu, LIU Xin-hua, XIE Jian-xin
    2012, 34(11): 1301-1307. DOI: 10.13374/j.issn1001-053x.2012.11.008
    Abstract PDF
    Experimental investigation on concrete made from iron and steel slags for building high-strength artificial reefs
    LI Ying, NI Wen, CHEN De-ping, WANG Zhong-jie, ZHANG Bin
    2012, 34(11): 1308-1313. DOI: 10.13374/j.issn1001-053x.2012.11.002
    Abstract PDF
    Synthesis of titanium dioxide nanopowders by a low-temperature combustion method
    JIANG Lin-wen, LIU Wei-liang, WU An-hua, HU Fang-ren
    2012, 34(11): 1314-1318. DOI: 10.13374/j.issn1001-053x.2012.11.001
    Abstract PDF
    Computational methods of coal blending for the best combustion in mixed coal injection
    DUAN Xu-qin, MENG Ge-tai, JIN Long-zhe, DUAN Jian
    2012, 34(11): 1319-1324. DOI: 10.13374/j.issn1001-053x.2012.11.016
    Abstract PDF
    Simulation study on desulfurization of sintering flue gas in a dense flow absorber
    ZHANG Dong-hui, WANG Zhuo-hui, SONG Cun-yi, JIA Xian, LU Xi-ning
    2012, 34(11): 1325-1331. DOI: 10.13374/j.issn1001-053x.2012.11.017
    Abstract PDF
    Blank design and process parameters optimization of high neck flange forming by closed ring rolling
    SHU Xue-dao, XIAO Min, SUN Bao-shou, PENG Wen-fei
    2012, 34(11): 1332-1337. DOI: 10.13374/j.issn1001-053x.2012.11.009
    Abstract PDF
    Online data-driven modeling for strip thickness based on subtractive clustering
    LIANG Hui, TONG Chao-nan
    2012, 34(11): 1338-1345. DOI: 10.13374/j.issn1001-053x.2012.11.010
    Abstract PDF
    Adaptive backstepping control of multi-model switching for the hydraulic servo position system of a rolling mill
    SHAO Peng-zhen, FANG Yi-ming, WANG Wen-bin, JIAO Zong-xia
    2012, 34(11): 1346-1351. DOI: 10.13374/j.issn1001-053x.2012.11.019
    Abstract PDF
    Influence of flexural stiffness ratio on the buckling behavior of a stiffened plate
    WU Xiao-dong, SONG Bo
    2012, 34(11): 1352-1357. DOI: 10.13374/j.issn1001-053x.2012.11.020
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • 啪啪啪视频