• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>

    • column
    Numerical simulation on the diffusion law of blasting fume during roadway tunneling across a vein in an alpine mine
    CHEN Zan-cheng, YANG Peng, Lü Wen-sheng, HE Lei, MEN Rui-ying
    2011, 33(5): 521-525. DOI: 10.13374/j.issn1001-053x.2011.05.003
    Abstract PDF
    Ore blending of underground mines based on an immune clone selection optimization algorithm
    YAO Xu-long, HU Nai-lian, ZHOU Li-hui, LI Yong
    2011, 33(5): 526-531. DOI: 10.13374/j.issn1001-053x.2011.05.004
    Abstract PDF
    Effects of chemical mutation on the microbial leaching of low grade copper tailings
    DONG Ying-bo, LIN Hai, FU Kai-bin, MO Xiao-lan, WANG Han
    2011, 33(5): 532-538. DOI: 10.13374/j.issn1001-053x.2011.05.016
    Abstract PDF
    Transient simulation on the behavior of inclusions in liquid steel of the tundish with a filter
    ZHAO Xin-yu, ZHANG Jiong-ming, WU Su-zhou, HU Bo
    2011, 33(5): 539-543. DOI: 10.13374/j.issn1001-053x.2011.05.017
    Abstract PDF
    Effects of Li2O on the crystallization and heat transfer of mould fluxes for high Al steel
    WANG Huan, TANG Ping, WEN Guang-hua, YU Xiong
    2011, 33(5): 544-549. DOI: 10.13374/j.issn1001-053x.2011.05.018
    Abstract PDF
    Effects of intermediate cooling and tempering process on martensite-austenite constituents in niobium-bearing low carbon steel
    YU Wei, CHEN Tao, JIAO Duo-tian, CAI Qing-wu
    2011, 33(5): 550-556. DOI: 10.13374/j.issn1001-053x.2011.05.005
    Abstract PDF
    Effects of finish rolling temperature on the microstructure and mechanical properties of X80 high deformability pipeline steel
    ZHENG Xiao-fei, KANG Yong-lin, MENG De-liang, AN Shou-yong, XIA Dian-xiu
    2011, 33(5): 557-562. DOI: 10.13374/j.issn1001-053x.2011.05.006
    Abstract PDF
    Surface analysis of spangles on batch hot-dipped Zn-0.05Al-0.2Sb alloy coatings
    LU Jin-tang, ZHANG Wei-wei, PENG Shu, CHE Chun-shan
    2011, 33(5): 563-569. DOI: 10.13374/j.issn1001-053x.2011.05.007
    Abstract PDF
    Seawater temperature on the protection properties of epoxy coatings used in deep sea
    SUN Xiao-hua, GAO Jin, GUO Wei-min, CHENG Wen-hua, LI Xiao-gang
    2011, 33(5): 570-574. DOI: 10.13374/j.issn1001-053x.2011.05.008
    Abstract PDF
    Preparation and characterization of antibacterial Ag-SiO2 films on stainless steel by sol-gel method
    PENG Shuai, ZHENG Yu-dong, HAN Dong-fei, LIU Hui, ZHANG Xiao-bo, LIU Xing-fu, ZHANG Jing
    2011, 33(5): 575-580. DOI: 10.13374/j.issn1001-053x.2011.05.009
    Abstract PDF
    Plasma cladding coatings by precursor carbonization-composition process
    LIU Jun-bo, HUANG Ji-hua, LIU Jun-hai, SONG Gui-xiang
    2011, 33(5): 581-586. DOI: 10.13374/j.issn1001-053x.2011.05.010
    Abstract PDF
    Effect of strain rate on the microstructural evolution of hot deformed GH625 superalloy
    GUO Qing-miao, LI De-fu, PENG Hai-jian, GUO Sheng-li, WU Zhi-gang, HU Jie, DU Peng
    2011, 33(5): 587-592. DOI: 10.13374/j.issn1001-053x.2011.05.011
    Abstract PDF
    Effects of process parameters on the surface quality, microstructure and mechanical properties of Cu-12%Al wires fabricated by continuous unidirectional solidification
    LIU Jin-ping, LIU Xue-feng, HUANG Hai-you, XIE Jian-xin
    2011, 33(5): 593-599. DOI: 10.13374/j.issn1001-053x.2011.05.012
    Abstract PDF
    Compressive flow stress model of BFe10-1-1 alloy fabricated by continuous unidirectional solidification process using ANFIS
    GAN Chun-lei, LIU Xue-feng, HUANG Hai-you, XIE Jian-xin
    2011, 33(5): 600-605. DOI: 10.13374/j.issn1001-053x.2011.05.013
    Abstract PDF
    Slag-fly ash based cementitious materials special for high performance concrete
    FU Cheng-hong, NI Wen, ZHANG Xu-fang, WANG Zhong-jie, TIAN Ming-yang
    2011, 33(5): 606-613. DOI: 10.13374/j.issn1001-053x.2011.05.001
    Abstract PDF
    Mechanochemical preparation of calcined diatomite/α-Fe2O3 composite particle materials
    XUE Qiang, DU Gao-xiang, LIAO Li-bing, DING Hao, ZHAO Chao-xing
    2011, 33(5): 614-618. DOI: 10.13374/j.issn1001-053x.2011.05.002
    Abstract PDF
    Fabrication and characterization of black polycrystalline silicon
    LIU Bang-wu, XIA Yang, LIU Jie, LI Chao-bo
    2011, 33(5): 619-622. DOI: 10.13374/j.issn1001-053x.2011.05.022
    Abstract PDF
    Combustion model of a hot blast stove based on numerical simulation
    CHEN Shan-shan, GUO Hong-wei, ZHANG Jian-liang, YANG Tian-jun
    2011, 33(5): 627-631. DOI: 10.13374/j.issn1001-053x.2011.05.020
    Abstract PDF
    Numerical simulation and application of a regenerative thermal oxidizer
    XIAO Qi, JIANG Ze-yi, ZHANG Xin-xin
    2011, 33(5): 632-635. DOI: 10.13374/j.issn1001-053x.2011.05.021
    Abstract PDF
    Generation mechanism of axial force on the roll systems of a 2250 hot continuous rolling R2 rolling mill
    YAN Xiao-qiang, HUANG Sen, NIU Li-xin, ZHU Guang-hong, KONG Shun-fu
    2011, 33(5): 636-640. DOI: 10.13374/j.issn1001-053x.2011.05.014
    Abstract PDF
    Modelling and algorithm for the slab designing problem based on constraint satisfaction
    ZHANG Wen-xue, LI Tie-ke
    2011, 33(5): 641-646. DOI: 10.13374/j.issn1001-053x.2011.05.015
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • 啪啪啪视频