• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>

    • column
    Quantitative prediction and evaluation on the regularity of asymmetric damage and distortion upon broken rock mass roadways
    REN Fenhua, LAI Xingping, CAI Meifeng, LV Zhaohai, ZOU Lei, CHAI Xin, LI Libo
    2008, 30(3): 221-226,232. DOI: 10.13374/j.issn1001-053x.2008.03.003
    Abstract PDF
    Potential influencing factors analysis and safety evaluation on the landslide of high and steep slope
    YU Weijian, GAO Qian, ZHANG Yankai, ZHAI Shuhua
    2008, 30(3): 227-232. DOI: 10.13374/j.issn1001-053x.2008.03.004
    Abstract PDF
    Micromechanism of strength increase with curing time for compacted cement-soil
    WANG Bing, YANG Weimin, LI Zhanqiang
    2008, 30(3): 233-238. DOI: 10.13374/j.issn1001-053x.2008.03.015
    Abstract PDF
    Dissipative structures of inner cracks in low carbon steel during thermal healing
    ZHAO Zhongli, HAN Jingtao, LIU Jing, LIU Ziwei
    2008, 30(3): 239-243. DOI: 10.13374/j.issn1001-053x.2008.03.014
    Abstract PDF
    Effect of C and N on static recrystallization in vanadium microalloyed non-quenched/tempered steels
    XIN Binnan, LIU Guoquan, WANG Andong
    2008, 30(3): 244-248. DOI: 10.13374/j.issn1001-053x.2008.03.013
    Abstract PDF
    Joint interface characteristics of TA1/Q235 clad plates manufactured by accumulative roll-bonding
    DONG Chengwen, LI Yanfang, REN Xueping
    2008, 30(3): 249-253. DOI: 10.13374/j.issn1001-053x.2008.03.006
    Abstract PDF
    Microstructures and mechanical properties of TiAl-based alloys by spark plasma sintering
    LU Xin, HE Xinbo, LI Shiqiong, QU Xuanhui
    2008, 30(3): 254-257. DOI: 10.13374/j.issn1001-053x.2008.03.010
    Abstract PDF
    Effect of deformation parameters on the deformation resistance of AZ31 alloy
    DING Rui, CAI Qingwu, WEI Songbo
    2008, 30(3): 258-262. DOI: 10.13374/j.issn1001-053x.2008.03.012
    Abstract PDF
    A method to improve the properties of La-Mg-Ni hydrogen storage electrode alloys
    AN Fuqiang, LI Ping, QU Xuanhui, ZHENG Xueping
    2008, 30(3): 263-266. DOI: 10.13374/j.issn1001-053x.2008.03.007
    Abstract PDF
    Strain rate effects on tensile properties of electrodeposited nanocrystalline Cu
    ZHANG Hanzhuo, JIANG Zhonghao, LIAN Jianshe
    2008, 30(3): 267-271. DOI: 10.13374/j.issn1001-053x.2008.03.005
    Abstract PDF
    Sintering process of nanoscale tungsten powder
    LI Huiqian, LIN Tao, GUO Zhimeng, WU Chengyi, LUO Ji
    2008, 30(3): 272-275,306. DOI: 10.13374/j.issn1001-053x.2008.03.011
    Abstract PDF
    Electrochemical deposition of Rh as an active UV-SERS substrate
    LIU Peng, DIAO Peng, ZHANG Dafeng, XIANG Min, ZHANG Qi, WANG Fengping
    2008, 30(3): 276-280. DOI: 10.13374/j.issn1001-053x.2008.03.002
    Abstract PDF
    Thermodynamic analysis for the synthesis of Mo5SiB2
    ZHANG Laiqi, HUANG Lei
    2008, 30(3): 281-284. DOI: 10.13374/j.issn1001-053x.2008.03.009
    Abstract PDF
    Synthesis and mesomorphic properties of fluorinated Schiff base liquid crystals
    WEI Qiang, CAO Hui, ZHU Siquan, YUAN Xiaotao, ZHANG Lipei, YANG Huai
    2008, 30(3): 285-288. DOI: 10.13374/j.issn1001-053x.2008.03.001
    Abstract PDF
    Heat transfer model in pipe stretch-reducing process
    CHEN Wanli, JIANG Zeyi, ZHANG Xinxin, ZHANG Haiyan
    2008, 30(3): 289-292. DOI: 10.13374/j.issn1001-053x.2008.03.008
    Abstract PDF
    Flow and condensation of vapor with high partial pressure non-condensable gas in a separate heat pipe
    LI Hongying, WANG Li, YU Danhai
    2008, 30(3): 293-298. DOI: 10.13374/j.issn1001-053x.2008.03.017
    Abstract PDF
    Micro-structure evolution of coarse particles in fluidized bed combustion process
    LIU Boqian, TIAN Baobao, LI Qibo
    2008, 30(3): 299-301. DOI: 10.13374/j.issn1001-053x.2008.03.016
    Abstract PDF
    Integrated system for make-to-order production management in iron and steel enterprises
    CAI Yang, LI Tieke
    2008, 30(3): 302-306. DOI: 10.13374/j.issn1001-053x.2008.03.022
    Abstract PDF
    Exact solution to fuzzy edge of hot rolled narrow strips
    SU Lanhai, PAN Aiwen, MA Xianghua
    2008, 30(3): 307-310. DOI: 10.13374/j.issn1001-053x.2008.03.018
    Abstract PDF
    Filtered-X adaptive inverse control method and its application in hydraulic position servo system
    QU Lei, WANG Jing, YANG Binhu
    2008, 30(3): 311-315. DOI: 10.13374/j.issn1001-053x.2008.03.020
    Abstract PDF
    Application of adaptive genetic algorithm to optimum path planning of mobile robots
    LI Qing, FENG Jinling, LIU Yanling, ZHOU Zhou, YIN Yixin
    2008, 30(3): 316-323. DOI: 10.13374/j.issn1001-053x.2008.03.019
    Abstract PDF
    Robust H∞ Control for uncertain discrete-time systems with time-delay
    ZHANG Lei, LIAO Fucheng, LIU Heping
    2008, 30(3): 324-330. DOI: 10.13374/j.issn1001-053x.2008.03.021
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • 啪啪啪视频