• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>

    • column
    Analysis on unloaded arch structure of roof in mining steep seams using horizontal section top-coal caving
    SHAO Xiaoping, SHI Pingwu, HE Guicheng
    2007, 29(5): 447-451. DOI: 10.13374/j.issn1001-053x.2007.05.001
    Abstract PDF
    Relationship between the acoustic characteristics and damage variable in the process of uniaxial loading and unloading
    HAN Fang, JI Hongguang, ZHANG Wei
    2007, 29(5): 452-455. DOI: 10.13374/j.issn1001-053x.2007.05.002
    Abstract PDF
    Engineering application of saline soil after modification
    LIN Qinghua, LI Changhong, HUO Baoying, ZHANG Jiliang, ZHANG Yongsheng, FANG Xuesong
    2007, 29(5): 456-460. DOI: 10.13374/j.issn1001-053x.2007.05.003
    Abstract PDF
    Bearing behavior of a composite bolt pile and its engineering application
    JIN Aibing, WU Shunchuan, GAO Yongtao
    2007, 29(5): 461-464,527. DOI: 10.13374/j.issn1001-053x.2007.05.004
    Abstract PDF
    Research on precipitation of second phases for Al-Ti-B master alloy refiner
    CHEN Yajun, XU Qingyan, HUANG Tianyou
    2007, 29(5): 465-469. DOI: 10.13374/j.issn1001-053x.2007.05.005
    Abstract PDF
    Fabrication of the electronic package box preform of SiCp/Al composites by powder injection molding
    CHU Ke, JIA Chengchang, LIANG Xuebing, QU Xuanhui
    2007, 29(5): 470-474. DOI: 10.13374/j.issn1001-053x.2007.05.006
    Abstract PDF
    Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders
    MEI Xuezhen, JIA Chengchang, YIN Fazhang, CHEN Liliang
    2007, 29(5): 475-478. DOI: 10.13374/j.issn1001-053x.2007.05.007
    Abstract PDF
    Effects of oxygen on the microstructure and magnetic properties of Sm(Co, Fe, Cu, Zr)z permanent magnets
    TIAN Jianjun, ZHANG Shengen, QU Xuanhui, TAO Siwu, CUI Dawei
    2007, 29(5): 479-482. DOI: 10.13374/j.issn1001-053x.2007.05.008
    Abstract PDF
    Dynamic impact behavior during bubble collapsing
    WANG Guogang, SUN Dongbai, ZHANG Xiuli, YU Hongying, FAN Zishuan, MENG Huimin
    2007, 29(5): 483-485. DOI: 10.13374/j.issn1001-053x.2007.05.009
    Abstract PDF
    Electrochemical performance of a direct methanol fuel cell
    LIN Caishun, ZHANG Hongfei, WANG Shuyan, WANG Xindong
    2007, 29(5): 486-489. DOI: 10.13374/j.issn1001-053x.2007.05.010
    Abstract PDF
    Microstructure of the Fe-based coating by plasma cladding and characteristics of its heat-affected zone
    ZHANG Limin, SUN Dongbai, LI Huiqi, LIU Bangwu
    2007, 29(5): 490-493. DOI: 10.13374/j.issn1001-053x.2007.05.011
    Abstract PDF
    Fabrication and properties of 316L stainless steel/Y-PSZ composites
    XIE Jianxin, GUO Zhenwen, ZHANG Wenquan, LIU Xuefeng
    2007, 29(5): 494-498. DOI: 10.13374/j.issn1001-053x.2007.05.012
    Abstract PDF
    Edge cracking causes of hot rolled strips produced by CSP
    ZHAO Changliang, SUN Yanhui, TIAN Zhihong, CAI Kaike, LIU Jianhua, CHENG Xiaojun, WU Guangliang, ZHOU Chunquan
    2007, 29(5): 499-503. DOI: 10.13374/j.issn1001-053x.2007.05.013
    Abstract PDF
    Temperature field and thermal deformation of roll sleeve in twin-roll strip casting
    FANG Yuan, ZHU Guangming
    2007, 29(5): 504-507. DOI: 10.13374/j.issn1001-053x.2007.05.014
    Abstract PDF
    Breakage mechanism and application of the bottom main drive spindle in a R2 roughing mill during hot rolling by finite element analysis
    WEI Gangcheng, CAO Jianguo, ZHANG Jie, DAI Jiangbo
    2007, 29(5): 508-512. DOI: 10.13374/j.issn1001-053x.2007.05.015
    Abstract PDF
    H∞ filter and load observer based complex compensative control for vibration suppression in the 2-mass motor drive system of a rolling mill
    FU Jian, YANG Weidong, LI Boqun
    2007, 29(5): 513-518. DOI: 10.13374/j.issn1001-053x.2007.05.016
    Abstract PDF
    Development of integrated shape control technologies in hot strip mills
    HE Anrui, HUANG Tao, YANG Quan, CHEN Xianlin, ZHAO Lin
    2007, 29(5): 519-522. DOI: 10.13374/j.issn1001-053x.2007.05.017
    Abstract PDF
    Optimization method and computer program based on the blind number theory
    SHI Boqiang, ZHAO Dexiang, LI Haipeng, XIAO Chengyong
    2007, 29(5): 523-527. DOI: 10.13374/j.issn1001-053x.2007.05.018
    Abstract PDF
    Multidisciplinary variable coupling design optimization
    YU Biqiang, WENG Haishan, LI Jiang, QIU Lifang
    2007, 29(5): 528-531. DOI: 10.13374/j.issn1001-053x.2007.05.019
    Abstract PDF
    Denoising of thermogravimetry signal by wavelet transform
    YU Qingchun, ZHANG Shichao, WANG Xindong
    2007, 29(5): 532-536. DOI: 10.13374/j.issn1001-053x.2007.05.020
    Abstract PDF
    An electromotive force observer and position estimation with high precision for a permanent magnet synchronous motor
    XU Jianying, LIU Heping
    2007, 29(5): 537-541. DOI: 10.13374/j.issn1001-053x.2007.05.021
    Abstract PDF
    Design of an optimal preview controller for a kind of discrete-time systems
    LIAO Fucheng, LIU Heping
    2007, 29(5): 542-547. DOI: 10.13374/j.issn1001-053x.2007.05.022
    Abstract PDF
    Method of resource allocation for computational grids based on reverse-auction
    CHEN Donge, YANG Yang, LIU Li
    2007, 29(5): 548-552. DOI: 10.13374/j.issn1001-053x.2007.05.023
    Abstract PDF
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  •  <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
    • 啪啪啪视频