Chinese Journal of Engineering 1996 Vol. 18 No. 5

Bubble Properties in LHJ Flotation Column

Zhu Youyi, Zhang Qiang, Wang Huajun

1996, 18(5): 401-405. DOI: 10.13374/j.issn1001-053x.1996.05.001

Abstract PDF

Weathering Charecteristics and Mechanisms of Rapid-Hardening Backfill Materials

Cai Sijing, Mao Shilong, Fang Zulie

1996, 18(5): 406-409. DOI: 10.13374/j.issn1001-053x.1996.05.002

Abstract PDF

Bond Mechanism of Metallic Pellet Produced from Zn-Pb-Bearing Iron and Steel Plant Dust

Wang Dongyan, Chen Weiqing, Zhou Rongzhang, Lin Zongcai

1996, 18(5): 410-413. DOI: 10.13374/j.issn1001-053x.1996.05.003

Abstract PDF

Calculation Model of Mass Action Concentrations for Fe-C-O Metallic Melts

Zhu Rong, Zhang Jian, QIu Yongquan

1996, 18(5): 414-418. DOI: 10.13374/j.issn1001-053x.1996.05.004

Abstract PDF

Infrared Optical Properties of Diamond Films Deposited at Low Temperatures

Wang Jianjun, Lu Fanxiu

1996, 18(5): 419-423. DOI: 10.13374/j.issn1001-053x.1996.05.005

Abstract PDF

Sinter of Mechanical Activated Molybdenum-Copper Powder

Li Xiaohong, Jie Zizhang, Yang Rang, Hu Shuwen

1996, 18(5): 424-427. DOI: 10.13374/j.issn1001-053x.1996.05.006

Abstract PDF

Properties and Behavior of Single Crystal Diamond in Fe Substrate Binder

Wang Lan, Guo Ximian

1996, 18(5): 428-431. DOI: 10.13374/j.issn1001-053x.1996.05.007

Abstract PDF

Investigation on Heat Treatment Dual-Phase Drawn Steel Pipes Used as Hydraulic Cylinder

Wang Sigen, Feng Huiping, Hua Lixian, Wang Xu, Huang Man

1996, 18(5): 432-435. DOI: 10.13374/j.issn1001-053x.1996.05.008

Abstract PDF

Incremental Melting and Solidification Molding Process

Jia Chengchang, Nobuyoshi Sasaki

1996, 18(5): 436-439. DOI: 10.13374/j.issn1001-053x.1996.05.009

Abstract PDF

Fundamentals of the Spray Forming Processes for Fabrication of Materials

Zhang Jishan, Sun Zuqing, Chen Guoliang

1996, 18(5): 440-445. DOI: 10.13374/j.issn1001-053x.1996.05.010

Abstract PDF

Disscussion on Relationship between Thermal Mechanical Fatigue Life and Strain Range

Wang Jianguo, Wang Lianqing, Tang Junwu

1996, 18(5): 446-449. DOI: 10.13374/j.issn1001-053x.1996.05.011

Abstract PDF

Establishment and Realization of Integrated Quality Control System for the Process of Production

Lei Lixin, Zhu Weichang, He Yuxin

1996, 18(5): 450-453. DOI: 10.13374/j.issn1001-053x.1996.05.012

Abstract PDF

Study of Rolls Deformation of Pair Cross Mill

Wang Bangwen, Hu Bingjun

1996, 18(5): 454-459. DOI: 10.13374/j.issn1001-053x.1996.05.013

Abstract PDF

New Method of Input Torque Balancing of Planar Linkages

Han Jianyou, Zhang Suhua

1996, 18(5): 460-463. DOI: 10.13374/j.issn1001-053x.1996.05.014

Abstract PDF

Study of Contact Thermal Resistance between Two Coaxial Cylindrical Layers(Ⅱ):Parameter Analysis

Yin Xiaojing, Degiovanni A

1996, 18(5): 464-467. DOI: 10.13374/j.issn1001-053x.1996.05.015

Abstract PDF

Fully Digitized Direct Self-Control System of an AC Motor

Sun Shaoyuan, Wang Junran, Li Huade

1996, 18(5): 468-472. DOI: 10.13374/j.issn1001-053x.1996.05.016

Abstract PDF

High Speed Zn-Ni Alloy Electroplating

Meng Huimin, Wu Jixun, Liu Qunxian, Lu Yanping, Zhang Puqiang

1996, 18(5): 473-476,481. DOI: 10.13374/j.issn1001-053x.1996.05.017

Abstract PDF

Electrochemical Behavior of Reinforcing Steel Embedded in Fresh Concrete Mud

Zhang Lin, Wu Yinshun, Fang Zhi, Yao Yan, Tian Pei

1996, 18(5): 477-481. DOI: 10.13374/j.issn1001-053x.1996.05.018

Abstract PDF

Electrodeposition of Cu-Ni Layered Films by Dual Potential Pulse Method

Xue Jiangyun, Wu Jixun, Yang Dejun

1996, 18(5): 482-485. DOI: 10.13374/j.issn1001-053x.1996.05.019

Abstract PDF

Behavior of Fatigue Crack Formation under the Action of Combined Stresses

Jin Donglai, Liu Rufeng, Chen Zhanghua

1996, 18(5): 486-490. DOI: 10.13374/j.issn1001-053x.1996.05.020

Abstract PDF

Best approximation of Bezier Surface

Wang Bingtuan, Zhang Zhigang, Wang Juntuan, Wang Ping

1996, 18(5): 491-494. DOI: 10.13374/j.issn1001-053x.1996.05.021

Abstract PDF

Export File

Citation

Format

Content