• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • 由熔融高爐渣制備微晶玻璃

    Preparation of glass-ceramics from molten blast furnace slag

    • 摘要: 采用熔融法,由熔融高爐渣制備性能穩定的基礎玻璃.通過對基礎玻璃的差熱分析確定微晶玻璃的熱處理工藝制度.結合X射線衍射分析、掃描式電子顯微鏡觀察等現代研究方法,確定了微晶玻璃熱處理制度的最佳工藝參數,并研究了微晶玻璃的晶體生長方式.微晶玻璃的熱處理最佳工藝參數為:核化溫度850℃,保溫1.5 h;晶化溫度935℃,保溫1 h.玻璃首先從表面開始析晶,然后逐步向內部生長.實驗所得微晶玻璃的力學性能,如抗折強度、耐酸堿性和硬度,均優于天然大理石.

       

      Abstract: Basic glass with stable properties was prepared from molten blast furnace slag by using the melting method. The heat treatment regime of glass-ceramics was determined by differential thermal analysis of the basic glass. Optimum heat treatment parameters were selected and the crystal growth pattern of glass-ceramics was analyzed by X-ray diffraction and scanning electron microscopy.The results show that the optimum heat treatment parameters of glass-ceramics are the nucleation temperature of 850℃ for 1.5 h and the crystallization temperature of 935℃ for 1 h. The crystallization grows from the surface to interior gradually. The mechanical properties of the prepared glass-ceramics,such as bending strength,acid and alkali resistance,and hardness,are better than those of ordinary marble.

       

    /

    返回文章
    返回
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • 啪啪啪视频