• <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • 煤層深孔聚能爆破封孔技術

    Sealing technology of coal bed deep-hole cumulative blasting

    • 摘要: 針對煤層深孔聚能爆破瓦斯抽放封孔技術問題,通過分析聚能爆破施工工藝及封孔物質力學行為,發現爆破孔孔徑和封孔材料性質是影響封孔長度的主要因素.綜合分析爆破安全、抽放工藝和施工條件,確定聚能爆破合理封孔長度為7.5~10.0 m.以焦煤集團九里山礦14121和24021工作面為例,對煤層深孔聚能爆破封孔技術可行性進行了驗證.

       

      Abstract: The construction technology of cumulative blasting and the mechanical behavior of sealing materials were analyzed for the gas drainage sealing technology of coal bed deep-hole cumulative blasting.It is shown that blast hole diameter and sealing material properties are the main factors which influence sealing length.After comprehensive analysis of blasting safety,drainage technology and constructional conditions,the reasonable sealing length of cumulative blasting is considered to be in the range of 7.5 to 10.0m.Finally,the feasibility of coal bed deep-hole cumulative blasting sealing technology was tested with the 14121 and 24021 working faces in Jiulishan Coal Mine of Jiaozuo Coal Group as an example.

       

    /

    返回文章
    返回
  • <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <table id="y4y0w"><option id="y4y0w"></option></table>
  • <li id="y4y0w"></li>
    <noscript id="y4y0w"></noscript>
    <noscript id="y4y0w"><kbd id="y4y0w"></kbd></noscript>
    <noscript id="y4y0w"><source id="y4y0w"></source></noscript>
    <menu id="y4y0w"></menu>
    <table id="y4y0w"><rt id="y4y0w"></rt></table>
  • 啪啪啪视频